(i) CONSTRUCTION/REPLACEMENT OF WELL 58L/S FLOWLINE
NEMBER III (SWAMP) – BAYELSA STATE. MAY-JUNE 2011
(ii) CONSTRUCTION/REPLACEMENT OF WELL 5 L/s FLOWLINE,
EKULAMA 1 (SWAMP)- RIVERS STATE.JULY 2011
(iii) LEAK REPAIR OF WELL 30T FLOWLINE, EKULAMA 1(SWAMP)-
RIVERS STATE- AUGUST 2011.
(iv) INTEGRITY CHECK OF WELL 001L/S, 004L/S,006T,008L/S,009L/S
&010T FLOWLINE, SANTA BARBARA (SWAMP)- BAYELSA STATE,
(v) MECHANICAL MODIFICATION OF SHELL FLOW STATION, AWOBA
(SWAMP)- RIVERS STATE, NIGERIA – FEB – MARCH 2012.
(vi) AGG MODIFICATION AND VALVES INSTALLATION AT OBIGBO GAS
PLANT, RIVER STATE – APRIL 2012
(vii) AGG MODIFICATION AT OWAZA(IMO RIVER), RIVER STATE- APRIL 2012
(viii) REMOVAL/ INSTALLATION OF 18” BOOSTER COMPRESSOR ACTUATOR
VALVE WITH SPOOLS AT GBARAN UBIE, BAYELSA STATE – JULY 2012
(ix) MECHANICAL MODIFICATION WORK AT NEMBE 2 & 4 (SWAMP 2),
BAYELSA STATE,NIGERIA – AUGUST –NOVEMBER 2012
Provision of Leadership, supervision, technical guidance and mentoring to
Monitoring and appraising construction work in the specific area assigned to
ensure consistency with Engineering drawings, design specification, client
standard, safe work practices and applicable codes.
Planning and Implementation of the construction phase, execution strategies,
resource planning, daily interfaces with the client’s Project Engineer to ensure
alignment with contract obligation, technical specification and terms and
Implementation of project safety, quality, schedule and cost objectives during
construction, commissioning and start-up phase.
Serving as Project Team’s first line supervisor for safety management and
suggesting remedial steps in areas of deficiencies.
Involve in Fabrication and Installation/start-up of Oil & Gas production
Involve in the construction management, budgeting, cost estimating, Project
execution, planning, cost forecasting, general fabrication & quality assurance.
Coordination of Field Training including on-the-job and off-the-job.
Ensuring effective Project Close-out.
Monitoring site installation of Flowlines, Cathodic Protection, manifold, Vents,
Structural supports etc.
I. Tracing and measuring the appropriate right of way (ROW).
II. Inspection to ensure proper excavation and backfilling.
III. Controlling of daily welding report and field inspection report.
IV. Verification of dimension orientation and location of pipes/ pipe fittings.
V. Regular updating of welding log.
VI. Supervision of fabrication of spools by welders and fitters, and their installations.
VII. Supervision of hydro-testing of completed lines to obtain the rating standard of client.
VIII. Reinstatement and alignment of removed spools and valves after hydro-testing.
IX. Inspection of hook-up arms and bolting up.
X. Ensure visible and appropriate positioning of pressure caution sign post.
(i) CONSTRUCTION AND REPLACEMENT OF WELL32L FLOWLINE, AGBADA
1, ALUU, RIVERS STATE, FEB. 2009
(ii) CONSTRUCTION AND REPLACEMENT OF WELL 7L/S FLOWLINE,
AGBADA1, ALUU, RIVERS STATE MARCH-APRIL 2009
(III) CONSTRUCTION AND REPLACEMENT OF WELL 7L/5S FLOWLINE,
OTAMIRI, ETCHE, RIVERS STATE, MAY 2009
(IV) SECTIONAL REPLACEMENT OF WELL 8L/S FLOWLINE, OTAMIRI, ETCHE,
RIVERS STATE, JUNE 2009
(V) CONSTRUCTION AND REPLACEMENT OF WELL 47L/5S FLOWLINE,
AGBADA 11, IGWURUTA, RIVERS STATE. JUNE-SEPT 2009
(VI) FABRICATION AND INSTALLATION OF ENHANCED MAIFOLD CAGING AT
NEW ELENWO, RIVERS STATE. DECEMBER 2009-MARCH 2010
(VII) CONSTRUCTION AND REPLACEMENT OF WELL 32SL FLOWLINE,
AGBADA 1, ALUU, RIVERS STATE. JULY-AUGUST, 2010
(VIII) MAINTENANCE AND REPAIR OF 6”.X8X#600 SPOOL HEADERS,
AGBADA 1,FLOWSTATION, ALUU, RIVERS STATE. AUGUST, 2010.
(IX) INTEGRITY CHECKS OF WELL 47&50L/S FLOWLINE, AGBADA 11,
IGWURUTA, RIVERS STATE. OCT. 2010