Back to CV list
olufemi
Personal data and contacts will be open only to employers with access to CV database
Engineering and field/control services 2 800 000
Job Type: Full-Time

Education

From 0 to 2009
ladoke akintola university of techology, ogbomoso
No added languages

Experience

electrical Engineer
MATEX Engineering Services
January 2013 - Present Day (4 years 3 months)

BIODATA

11 Eliogbolo Road, RumkpakwolusiE-mail address: scandium2005@yahoo.comPort Harcourt, Rivers State.LGA/State of Origin: Iwo/Osun

Tel (mobile): +234 803 1103 185Date of Birth: 17/02/1983

2012-2013Postgraduate Diploma in Industrial Automation, Prolific Systems and Technologies ..Thane, India.

2004-2009B. Tech Electrical/Electronic Engineering, 2nd Class Upper Honours Division

Ladoke Akintola University of Technology, Ogbomosho, Nigeria.

SOFTWARE APPLICATION SKILLS

·SCADA configuration using Wonderware (Intouch).

·PLC Programming: RSLogix 500 and Controllogix 5000.

·Siemens PLC S7300, S7400 (Simatic Manager)

·Excellent ability of Microsoft Office Suites Packages such as Word, Excel, Power point, Access

·Microsoft Office Suite and Visual Studio 2008

·Microsoft Certified Professional (MCP)

EXPERIENCE:

ELECTRICAL ENGINEER

MATEX ENGINEERING SERVICES LIMITED

January 2013-present

PROJECT WORKED ON INCLUDE

PORTHARCOURT REFINING COMPANY LIMITED

·Troubleshooting 120mm power cable from crude pump to Electrical Substation 11.

·Repair of various starter module i.e. MS265, MS115, MS50, MS25, and MS12.

·Replacement of damaged earthen cable at Dimersol Butemer Isomerisation and Alkylation Unit.

·Supply of power for PHRC data center through Electrical Substation 15 using RMU.

·Troubleshooting faults on motor starter modules at various Electrical Substations.

·Relamping of flood lighting systems at Thristle Bridge down to Navy Gate at Okrika Jetty.

·Performing cathodic protection for earthen pipelines using zinc anode.

·Troubleshooting of various transformer faults.

·Troubleshooting and rectification of faulty lighting circuits.

·Relamping of flood lighting system around depot and PHRC maintenance.

PROFESSIONAL EXPERIENCE:

Training Experience with Prolific Systems and Technologies Pvt Ltd, Thane, India;

·Monitoring, Supervising and Controlling Machines in the Field using SCADA Wonderware.

·Generating Real and Historical Time Trends with Alarm History of Equipment in Industrial Environment.

·Managing the Recipe of Various Industrial Processes.

·Ensuring Adequate Security of Various Levels of Industrial Processes.

·Dynamically Processing Graphics to Suite Industrial Requirements.

·Generating Data for Previous consumption of Power from the Plants.

·Performing Professional Programming to Suite Industrial Requirements using: Allen-Bradley RSLogix 500 and Controllogix 5000, Siemens:-S7-300 [Simatic Manager].

·Maintaining Industrial Networks and Communications using MODBUS, MODNET, DH485, Ethernet TCP/IP, ControlNet, RS232, and DeviceNet.

·Configuration of DCS Yokogawa Centum CS 3000 to Conform to Industrial Requirements.

·Maintaining Basic Electrical Systems and Ensuring Electrical Safety as Required by the Industry.

·Configuration of ABB Drives using their Required Current and Power Ratings as Prescribed by the Manufacturer.

KEY EXPERIENCE:

Training Experience with COD Energy Services Limited, PH, Nigeria;

In Carrying out Instrumentation controls and automation (ICA) engineering Design in Oil and Gas facilities

93 Tombia Extension Road, New GRA Phase II, Port Harcourt.

-energyservices.com

Training entails:

§Generation of Instrument hook up detailed drawings

§Generation of Instrument equipmentinstallation details

§Generation ofinstrument Specification/datasheet for vendor procurement

§InterpretationPIDs to generate Instrument Drawings

§Preparation Site Visit checklist for offshore and onshore projects,

§Development of Site sketches, preparation of site visit report,

§Development of on-site sketches to As-build Drawings,

§Generation of Demolition drawings in line with, piping Equipment layout drawing

§Preparation of instrument List

§Generation of Instrument MTO

§Preparation of Instrumentation and Control system installation /Construction work scope

§Generation of SAFE Charts

§Generation of Instrument Tubing and Tray layout

§Generation of Pilot Rack installation detail

§Generation of SDV Panel Block diagram

§Generation of Control Panel Tie –in Schematics

§Generation of Fusible Loop Layout

§Generation of Tubing tray installation notes

§Conversant with International Codes and Standards such asAPI , ANSI, , NFPA, ISA, IEEE, IEC, NEMA and ISO alongside Company specifications for MOBIL (MPN Specs) and SPDC Nigeria.(DEP)

Oct 2010-Oct 2011: Computer Instructor, BJSS IGBOGENE, BAYELSA (NYSC)

§Conducting technical training for junior students on basic networking

§Developed a timeline for students on computer appreciation

§Tutored all junior students on basic computer hardware devices

§Tutored all junior students on basic computer software devices

Jun 2008-Dec 2008: Network/System Engineer, Intercontinental Bank PLC VI Lagos

§Installation of Network Printers on Workstations.

§Managing and Maintaining Users, Computers, and Groups.

§Managing and Maintaining Access to Resources.

§Verifying and Troubleshooting Basic Router Operation and Routing on Ciscodevices.

§Installation of Windows 2003 on Workstations.

§Managing and Maintaining Physical and Logical devices.

§Setting up and managing over 80 user Workstations.

§Configuration and Maintenance of Microsoft Outlook on User Workstations.

§Providing system support to end users.

§Network configuration and troubleshooting from the terminal exchange to the server room in collaboration with other professionals from 21 century.

§Performing system updates from windows 2003 to 2007.

§Configuration of SOAP, XML and other flex-cube software on user workstation.

§Performing upgrade of the Rack in the server room effective and efficient network performance.

§Maintaining a quality communication relationship with over 80 end users when under pressure of low network performance.

REFRENCES

Will gladly furnish you with my personal and professional references upon request.