IT/NETWORKING ENGINEER AND CAD OFFICER
February 2005 - April 2008 (3 years 3 months)
- Site Surveying.
- Configuration and installation of speed LAN radios, Switches, Sectorial Antenna, Access points, planet radios, Routers.
- Networking and troubleshooting of LAN,WAN .
- Marketing and sourcing of clients to subscribe to our network.
- Full preparation and Route survey of Escravos –Yokri link Road (16.4km facility Length), Location = Escravos.
- Boundary Re-opening of Escravos Beach RBTW 1 route and Peg Re- establishment, (BR = 6.1 km) Location = Escravos
- As –Built verification and Boundary Re-opening of Forcados North bank to Yokri(15km facility length), Location = Forcados.
- Tank Monitoring at Forcados Terminal which include Ovality studies, Radial displacement, Verticality Check and subsidence of 14 Tanks at Low ,middle and high Oil levels, Location = Forcados .
- Boundary Re-opening and pillar Re-establishment of southern swamp Associated Gas Gathering(BR =15.8km facility length, P.I Line = 15.8km, Sounding = 9km,
Location = Tunu.
- Full preparation survey of the proposed 10” DODO- North gas Flowline (FP= 9.9km, BR= 9.8km, P.I = 9.8km, BR of Location = 2.5km, Sounding =9km ),
Location =Tunu .
- Boundary Re-opening and Grid leveling and detailing of the Southern Swamp Associated Gas Gathering Sandfill Location = Tunu.
- Full Preparation and Detailing of NGC – flowstation Gasline route (FP =480m, Area = 5 ha, FP = 200m , Area = 3 ha, FP = 500m, Area = 4.5 ha) Respectively,
Locations = Olomoro, Oweh , Uzere.
- Boundary Re-opening and Redefinition At Olomoro compressor station,
Location = Olomoro .
- Route survey for 18” gasline from Odidi 1 manifold to ELPS manifold. (BR= 4.2km, As-Built =20km, sounding = 3.5km), Location = Odidi.
- Boundary Re-opening /Redefinition and detailing Near Oroni Flowstation (BR = 5.6km , Area = 2.3 ha ), Location = Oroni.
- Full preparation Survey of additional acquisition for Otumara (FP = 1.8km, Area = 4 ha). Location = Otumara
- Importation and joining of pillar co-ordinates from Excel to Microstaion.
- Reading and placing of Grid Leveling in the drawing.
- Importation of Sounding.
- Griding of the drawing depending on the scale specification .
- Cutting of Drawing into sheets and putting of bearing, Northern , Route Match.
- Putting the drawing boarder and title Bar.
- Profile plotting.
- Printing of drawing using plotter.