Back to CV list
Atuma
Personal data and contacts will be open only to employers with access to CV database
Lead instrumentation/formation evaluation engineer 250 000
Job Type: Full-Time , open to relocation

Education

From 0 to 2004
University of Benin,Auchi Polytechnic
No added languages

Experience

Lead Instrumentation/Formation Evaluation Engineer
Drilling Dynamic
January 2014 - Present Day (3 years 3 months)

Ø Participate in pre-job planning and equipment mobilization

Ø Develop and maintain a professional and positive relationship with the client representative and drill crew at the well site

Ø Stress Analysis for drilling assemblies and wellbore(Torque and Drag analysis)

Ø Provide technical support to clients and drill crew at the well site

Ø Follow up failures and ensure that failures reports are closed with the client

Ø Formation evaluation, log interpretation and drilling optimization

Ø Carried out real-time interpretation and analysis of surface and downhole data while drilling

Ø Risk Analysis and prevention in drilling procedure/operation

Ø Contribute to the Quality Health Safety and Environment policies of my employer ,client and drilling contractor at the wellsite

Ø Calibration of gas system of CMS Mud Logging Unit

Ø Installation ,maintenance and operation of instruments of CMS Mud Logging Unit

Ø Installation, maintenance, calibration and trouble shooting of analog and digital sensors

Ø Installation and maintenance of pressurization and purge motors in mud logging units

Ø Influx monitoring

Ø Calibration of gas detector systems like SRI and baseline (at Seplat and sterling oil companies

QA/QC Inspector
Daewoo E&C Nigeria Limited
March 2013 - December 2013 (10 months)

Job Details:

Ø Study drawing prior to inspection of structures

Ø Inspection of steel structures for Otumara Domgas project for SPDC

Ø Conduct quality control inspection on steel structures

Ø Responsible for the inspection of steel structural cladding and roofing

Ø Checking of the structure assembly, being followed from drawing or specification

Ø Checking that all bolts being tightened are of the correct length and all washers mounted

Ø Checking that the plumbness/alignment of the steel structure are within tolerance prior to grouting

Ø Monitor civil work process and status for QA/QC departmental information

Ø Verify repair of welding joints if required

Ø Visual inspection after welding and selection for NDT

Ø Inspection of pipe orientation to conform to the isometric drawing

Ø Monitoring of pipe fitting operations

Ø Marking, inspection and measurement of beams for structural fabrication

Ø Structural fitting and inspection of plates placement and markings at the right position

Ø Monitoring of marking,cutting,chipping,welding, and fabrication of structural fittings

Instrumentation/mud logging Engineer
Sentrex Oilfield Limited
April 2007 - March 2013 (6 years )
Job details as a Mud logger:  Influx monitoring(well kick)  Monitoring ,calculating and plotting drill depth and drill rate  Determine lag time and making continuous adjustment while drilling  Swab and Surge measurement while tripping.  Lithological identification.  Monitoring of torque and drag.  Measurement of gas level in the well borehole.  Geological description of rock formation.  Evaluating detailed and complex data for signs of oil or gas using various laboratory technique  Monitoring of drilling parameters such as speed of rotation, rate of penetration, pump rates, pit levels, cutting rates and mud flow rate.  Working in well site units, collecting, processing and analyzing of geological samples  Interpreting information and feeding back to the drilling team to enhance safety and success.  Predicting dangerous situation such as over- pressure formation  Operating and maintaining a real- time computer based data acquisition system, the Advanced Logging System (ALS) which records all aspects of rig activity  Taking on the primary health and safety role for the well through constant monitoring of Critical drilling parameters. Job details as Instrument Engineer:  Installation, maintenance, calibration and trouble shooting of analog sensors such as hook load, pressure, temperature, flow, mud weight, conductivity, pit level and torque sensors.  Installation, maintenance, calibration and trouble shooting of analog sensors such as hook load, pressure, temperature, flow, mud weight, conductivity, pit level and torque sensors.  Installation, maintenance and troubleshooting of Data Acquisition System in the Mud logging unit at (SCRABEO 3 OIL RIG FOR ADDAX PETROLEUM).  Calibration of gas detector systems like SRI and baseline (at EXXONMOBIL in ADRIATIC 8 (AD-8 RIG)  Installation and maintenance of pressurization and purge motor systems  Experience with work permit system with high regards for Quality and Safety  Perform Risk Analysis, Root Cause Analysis and Job Hazards analysis  Select, specify ,and design the installation of control element devices to manipulate flow, temperature, pressure, level and other variables  Maintain, calibrate, and troubleshoot all field and process instrumentation, analyzer, PLC,SCADA and DCS.  Responsible for automation and controls systems design, specification, programming, simulation and testing, and start-up assistance.  Select the physical communication media, network architecture, and protocols based on data requirements in order to complete system design and support system development..  Calibrate, troubleshoot, test, repair, and improve sensing, measurement, and actuation devices  Develop a functional description of the automation solution (e.g., control scheme, alarms, HMI, reports).