Back to CV list
Khalil
Personal data and contacts will be open only to employers with access to CV database
Lead operations engineer 470 000
Job Type: Part-Time

Education

From 0 to 2008
El minya university, Egypt.
No added languages

Experience

Lead Operation Engineer
ARABIAN BEMCO CO.LTD
June 2012 - Present Day (4 years 11 months)

Job:

Lead GT area operation engineer. 3 turbines *150MW (7001FA), Speed Tronic MKVIe .

Qurayyah block #6 project, Saudi Electricity Company.

Responsibilities and Skills:-

  • Directing and guiding the operation team, coordinate the Job with the other departments (construction and commissioning) for GT (gas turbine) area, and BOP (balance of plant) area
  • Preparing the reliability reports for the running GTGs.
  • Preparing, planning and following the preventive maintenance for the mechanical and chemical Job which related to the GTG area during the operation periods.
  • Managing and co-coordinating the outage punch list items completing.
  • Maintains all shift operations and maintenance documents.
  • Providing input for Daily Outage and Weekly Installation Reports in a clear, detailed and accurate manner.
  • Providing leadership and technical direction to skilled laborers performing work on customer site to ensure work activity meets the requirements of the customer.
  • Maintaining strong safety mindset to assure the executed work reflects the technical requirements.
Lead Operation Engineer
HYUNDAI HEAVY INDUSTRIES CO.LTD
February 2012 - May 2012 (4 months)

Job:

Lead operation engineer. 7 turbines *170MW (7001FA), Speed Tronic MKVIe with 2 steam turbine and there auxiliaries.

Construction of PP11 IPP power plant for Dhuruma Electricity Company.

Responsibilities and Skills:-

  • Leading, directing and guiding the operation team, coordinate the Job with the other departments (construction and commissioning) for GT (gas turbine) area, and BOP (balance of plant) area.
  • Reports and corrects unsafe conditions or hazards to the Operations Manager.
  • Assist Start-up Engineer during the commissioning phase ensuring proper and safe operation of the machine.
  • Performs water titration tests and adjusts chemical injection rates to maintain prescribed chemical limits in heat recovery steam generator.
  • Following proceeding for system start up and shut down for the gas turbine GE 7001FA DLN duel fuel machine.
  • Start-up and operation for Fuel Gas Treatment:

1. System consists of three (3) 50% “Knock-out Drums” and three (3) 50% “Filter and Separators”,.

2. One (1) 100% ultrasonic flow settlement meter and One (1) 100% ultrasonic flow Back-up meter ,and two gas chromatographs.

3. Three (3) x 50% gas fired water bath heaters.

4. Pressure reducing stations consisting of four (4) x 33.3% pressure reducing valve trains.

5. Four (4) x 33% Gas compressors are provided to increase the line pressure to meet the pressure requirements of the gas turbines.

6. Oil bath heater: Each unit has one oil bath heater that is MWI (Modified Wobbe Index) control heaters.

  • Monitoring and operation for water treatment plant (filtered, service, demi, and waste water treatment).
  • Monitoring and operation for liquid fuel treatment (sodium removal plant: GEA Westfalia Separators).
Operation Engineer
ARABIAN BEMCO CO.LTD
March 2010 - July 2011 (1 year 4 months)

Job:

Gas turbine operation engineer. 32turbine*55MW (7001EA) Speed Tronic MKVIe.

Construction of Power Plant No. 10. For Saudi Electricity Company.

Responsibilities and Skills:-

  • Following proceeding for system start up and shut down for the gas turbine GE 7001EA duel fuel system (diesel and crude fuels).
  • Following Liquid Fuel system Flushing and air venting Procedure.
  • Water Wash System Procedure online (the compressor) and off line (the compressor and the turbine).
  • Lock-out & Tag-out for chemical, mechanical and electrical equipment.
  • Operation for crude fuel treatment plant (GEA WestfaliaSeparator).
  • Opens and closes valves as required for proper system operation and mechanical isolation.
  • Performs routine predictive, preventive, and basic corrective maintenance in accordance with technical manual procedures.
  • Visually inspects and listens to equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.
  • Monitors readings from instrumentation for variances from prescribed operating standards and procedures.
  • Supports maintenance activities on a part-time basis as required (e.g. tightening fittings, replacing valve packing, gaskets, valves, gauges, and cleaning or replacing other component parts as required, lubricating equipment, etc.).
Operation Engineer
UEEPC. Upper Egypt Electricity Production Company.
January 2009 - March 2010 (1 year 3 months)

Job:

Gas turbine operation engineer GE. 2*260 MW (MS 9001 FA), Speed Tronic MKVI. ALSTOM HP STEAM TURBINE 250 MW (ALSPA P320).

Construction of EL KUREIMAT III 750MW Combined Cycle Project.

Responsibilities and Skills:-

  • Following proceeding for system start up and shut down for the combined cycle.
  • Following proceeding for turbine cold and hot start up.
  • Monitor operation condition for the unit during normal operation.
  • Monitor the gas turbine condition during normal operation through MARK VI and MARK VIe control system.
  • Lock-out & Tag-out for chemical, mechanical and electrical equipment.
  • Following proceeding for starting, shut down, unit increasing and decreasing load.
  • Start up and operation CEMS Continuous Emissions Monitoring System.
  • Visually inspects and listens to equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.
  • Monitors readings from instrumentation for variances from prescribed operating standards and procedures.
  • Records operation and maintenance actions taken during shift in operator’s logbook.