Isua-utom
Personal data and contacts will be open only to employers with access to CV database
Mechanical Technician 350 000
Job Type: Full-Time

Education

From 0 to 1999
University of Nigeria,Nsukka
No added languages

Experience

MECHANICAL SUPERVISOR
TOMBA RESOURCES NIGERIA LIMITED,ESCRAVOS,DELTA STATE,NIGERIA
January 2011 - Present Day (6 years 6 months)

 Conduct duties safely and in accordance with company procedures at onshore and offshore work sites.

 Have In depth knowledge and ability to undertake repairs on ,Centrifugal gas compressors, Power turbines, High pressure water injection pumps, Sea water lift pumps for process & fire fighting, Centrifugal submersible lift pumps, General type of water and Oil pumps, Centrifugal / Screw / Gear / Plunger or Piston,Diesel Engines(Detroit and Caterpillar); Air compressors( Reciprocating and Screw), Overhaul of valves including PSV’s

 Can read and interpret P and ID and communicate with discipline lead and team members and operations team

 Participate in HAZOPs, technical reviews, risk assessment and Safety Audits.

 Direct and supervise the activities of rotating machinery technicians in the repair and maintenance of all categories of rotating machinery.

 Support Operations Division in resolution of machinery related problems.

 Troubleshoot plant machinery problems, conduct root cause analysis and recommend engineering solutions

 Prepare component / equipment repair procedures.

 Identify training requirements of site workforce.

 Execute and administer plant Preventive Maintenance program.

 Attend Toolbox meetings to establish scope of work activities such as safety requirements,permits to work, special tools and materials.

 Comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.

 Perform and participate in the preventive, corrective and troubleshooting mechanical maintenance activities of the plant equipment, Gas Turbines, Compressors and Pumps.

 Develops and maintains open communications on mechanical issues (for example, safe work practices, training, materials, and others) with co-workers

 Provides technical support and mentoring to other Technicians for maintenance and troubleshooting on Company mechanical equipment

 Responsible for the proper documentation and accurate reporting of maintenance, repairs, overhauls, adjustments, and inspection routines in the technician's area of responsibility

 Assist Mechanical supritendent to control and plan work activities.

 Assure the correct implementation of permit to work system.

 Ensure that proper safety induction briefings are conducted for all new personnel

 Maintain plant equipments and accessories as per the approved procedures

 Attends technical meetings, to remain informed of the latest specifications, codes, procedures, and technology

 Ensures the quality and timely completion of work scheduled by the maintenance department

 Repair, maintenance, inspection and function testing of mechanical plant and equipment.

 Ensure all planned maintenance requirements are carried out.

 Perform all work duties and testing safely, efficiently and in accordance with company procedures

 Carrying out the mechanical maintenance of equipment, plant and systems in a safe and effective manner

 Performing and recording mechanical maintenance activities as required by the planned maintenance system

 Assist lead mechanical technician and maintenance engineer to identify priorities to plan maintenance and shutdown activities to minimise downtime and maximise production

 Carries out fault finding and diagnosis of problems affecting plant and systems taking corrective actions to anticipate and prevent downtime and thus maximise oil and gas production

 Investigating and resolving equipment running faults

 Carry out risk assessment exercises and direct maintenance teams in toolbox talks as appropriate

MECHANICAL TECHNICIAN
NATIONAL ENGINEERING AND TECHNICAL COMPANY(NETCO),LAGOS,NIGERIA
November 2007 - December 2010 (3 years 2 months)

 Assist in the assembly, testing, preparations, servicing and operation of new and existing equipment

 Plans daily work based on work orders and job instructions received.

 Checks, troubleshoots faults on equipment, inspects equipment to identify/repair faults.

 Carrier out the daily repair work.

 Establishes maintenance scope of work, material specifications, engineering standards and completion time schedule.

 Monitors maintenance and modification work carried out by contractor and address problems/queries, as required.

 Provides specialist engineering input on scope of work and specifications.

 Implements preventative maintenance programs.

 Troubleshoot, identify and isolate faulty components, on Rotating equipment, Gas Turbine and Compressor equipment, using P&IDs, manufacturers’ manuals, drawings and diagrams.

 Identify spare parts required for maintenance work, from manufacturers’ drawings and spare parts lists.

 Perform shutdown maintenance repair and overhaul on all rotating and static equipment, including Gas Turbines, Compressors & Pumps.

 Insures that daily assigned maintenance activities within his areas of responsibility are performed in according to the laws, regulations, standards, specifications, and procedures.

 Read and understand operations manuals and provide and improvements, changes or recommendation

 Ensure that processes and procedures are carried out in accordance with company safety policies and the operation manual.

 Carry out maintenance and repairs as well as general yard duties as and when required.

 Compliance with and commitment to Client Corporate Management System, Company Policies and Procedures.

 Carry out maintenance work and servicing task to ensure a safe and efficient operation.

 Investigate and diagnose any deficiency which may impede efficient installation and act to correct the situation.

 Report faults or areas of improvement which will ensure continued product development.

 Accountable for safety of self and others in the work environment..

 Analysis and rectification of mechanical problems and issues.

 Ensure that all maintenance is undertaken with the highest regard to health safety and environment issues.

LEAD MECHANICAL TECHNICIAN
FATOKAAL INDUSTRIES LIMITED,
January 2004 - October 2006 (2 years 10 months)

 Ensure that all equipment is available to safely meet production targets and other performance standards.

 Reviews tender and contract documents related to shutdown and major overhaul. Participates in technical and commercial evaluation of bids and recommendation of successful bidder.

 Liaises with engineers, maintenance and operations personnel to identify and include other maintenance, inspection and modification work during shutdown

 Responsible for ensuring the mechanical maintenance of equipment, plant and systems is carried out in a safe and effective manner.

 Responsible for performing and recoding mechanical maintenance activities as required by the planned maintenance system.

 Assist Maintenance Engineer and Maintenance Supervisor to identify priorities to plan maintenance shutdown activities to minimise downtime and maximise production.

 Involve in fault finding and diagnosis of problems affecting plant and systems taking corrective actions to anticipate and prevent downtime.

 Performing breakdown repairs where necessary.

 Support and contribute to the positive safety culture within the operation seeking continual improvement in safety and environmental performance.

 Demonstrate knowledge of HSE issues and must ensure compliance with all company procedures

 Involves in safe execution of planned and defect maintenance on a wide range of mechanical equipment and safety systems associated with an offshore oil and gas production platform.

 Plan, execute and supervise all maintenance work on the platform.

 Coordinate safe and effective execution of planned maintenance work in close coordination with onshore maintenance group and the production supervisor on the platform

 Supervise the safe and effective execution of necessary replacements and repairs to restore service in the event of failure or malfunction

 Ensure documentation and reporting requirements on maintenance activities are adhered to

 Ensure the implementation of company safety and environmental procedures

 Diagnose and rectify faults to enhance maximum availability of equipment.

MECHANICAL TECHNICIAN
I.S KUTU ENGINEERING SERVICES
April 2000 - December 2003 (3 years 9 months)

 Carry out all works in accordance with defined Quality and Health and Safety Requirements.

 Perform shutdown maintenance repair and overhaul on all rotating and static equipment, including Gas Turbines, Compressors & Pumps.

 Participate in condition monitoring checks on machinery, and notify any malfunctions or defects to the immediate supervisor.

 Observe operation of all equipment during routine activities for abnormalities, and report any defects to relevant Supervisor.

 Supports and encourages team effort between operations, engineering, and projects groups

 Provides input and reviews the mechanical specifications and work practices

 Responsible and accountable for mechanical equipment

 Has the knowledge to apply and follow work permits through PTWS

 Ensures the quality and timely completion of work scheduled by the maintenance program

 Develops personal and team technical skills (for example, new regulations, equipment, methods, and others)

 Attends technical meetings, to remain informed of the latest specifications, codes, procedures, and technology

 Assist colleagues in maintaining a tidy and safe working environment.

 Provides accurate maintenance history and closeout reports of all completed work as

per company requirements.

 Supports other disciplines in the troubleshooting and fault finding of equipment.

 Carry out preventive maintenance tasks on on-line equipment.

 Carry out work as directed, monitors and maintains the health of the Mechanical

Equipment associated within his assigned area of the plant.

 Identify common failures and their causes, troubleshoot and make recommendations

for corrective action.