Back to CV list
Personal data and contacts will be open only to employers with access to CV database
Project quality engineer 600 000
Job Type: Full-Time , open to relocation


From 0 to 2014
delta state university abraka
From 0 to 2012
delta sate university abraka
From 0 to 2005
Petroleum training Institute
No added languages


welding enginer/inspector
Indviz Construction Limited
January 2013 - February 2013 (1 month)
-Witnessing of WPS/PQR approval and welders performance Qualification (AWS D1.1) -Carrying out of Dye Penetrant Examination under Construction of the Independent Power Plant Project
welding engineer/NDE inspectors
Advance Inspection and Testing
July 2012 - November 2012 (5 months)

-Witnessing of WPS/PQR approval and welders performance Qualification

(API 1104)

-Calibration of welding power sources

-Carrying out of NDT inspection and review reports

welding Engineer
Saipem Contracting Nigeria limited (Croatia
September 2011 - December 2011 (4 months)

Witnessing of WPS/PQR approval and welders performance Qualification (API

1104) under Bonga NW Project

welding engineer/inspector (senior certification officer)
nigerian institute of welding
December 2006 - Present Day (10 years 7 months)
  • Witness welder qualification to any Code (API 1104, ASME IX, AWS D1.1, EN 287) required by the client

-Review of WPS for material as per contract specification

-Witness of procedure qualification PQR welding and testing

  • RT- film interpretation.

-Conduct visual inspection on 100% of welds completed, marks visual defects for correction if any found

-dimension check, fit up according to applicable document.

-Perform random inspection on electrodes, filler wire & gases used for welding.

-Verify that control & storage of welding consumables are in order

-Evaluate non destructive results,

-Undertake material inspection, destructive and non destructive Testing on metal structure, pipelines and other weldment

-Review causes and effect of welding defects and take Remedial action -Ensure the correct welding procedure is being used and followed by welder (s) during the welding operation.