Nkama Ogbonnaya
Personal data and contacts will be open only to employers with access to CV database
QA/QC engineer
Job Type: Full-Time , open to relocation


From 2007 to 2009
Rivers State Polytechnic Bori
Mechanical Engineering
From 2003 to 2005
Rivers State Polytechnic Bori
From 1992 to 1999
Community Secondary School Amadi-Ama Port Harcourt
High School (S.S.C.E.)
From 1986 to 1992
Army Children School Rainbow Town Port Harcourt
Home Economics
From 2012 to 2015
University of Port harcourt Choba
Mechanical Engineering


QC Welding Inspector
Previously with Deep Blue Energy Service Oil And Gas Nigeria Limited
June 2013 - February 2016 (2 years 8 months)
Witness and inspect Procedure Qualification Record (PQR), Welders qualification test (WQT) Ensure that all welding consumables in use are approved by client, stored and controlled as Specified in welding consumable control procedure. Ensure that all materials in use are traceable to a material certificate. Ensure that the Works are carried out in accordance with best practices, project specifications and standards; providing technical guidance to Contractor and Subcontracts Work teams. Monitor and report on quality control activities at the Worksite to the QA/QC Leader. All fabrication and construction process activities and result of Works with the Contractor and Subcontractors, including welding, NDT, painting, testing, dimension control, etc, at the Worksite. Monitor and reports hierarchically to the Construction Manager with functional reporting to the QA/QC Leader. Inspection and verification of flange alignment during pipe spools installation. Monitor Post Weld Heat Treatment operations as per approved procedures. RT film interpretation Inspection of blasted surfaces to confirm surface profile is acceptable. Inspection of electrode consumables to conform to batch certificates and manufacturer’s instructions. Control of low hydrogen electrodes not meeting with manufacturer’s standards through baking and keeping consistent logs on use of such electrodes. Monitor the HSE/ quality / progress of the construction work on a daily basis (hands on) Working knowledge and understanding of HSE responsibilities; Working Knowledge of typical pipeline welding processes with particular emphasis on SMAW and TIG. Visual Inspection of pre-welding and post-welding activities in accordance with approved Welding Procedure Specifications. Ability to document work progress and maintain accurate and meticulous records. Material Inspection and conformity as per code/spec/Isometric drawing/P & ID requirement. Material inspection prior to commencement of fabrication and review of MTC against Witness NDT Inspection. Ensuring that work process is done according to specification Monitor fit-up operation in line with relevant drawings and WPS Carry out Visual Inspection of welds, during and after welding.
QC Welding Inspector
Previously with Alcon Nig Ltd
November 2009 - April 2013 (3 years 5 months)
Port harcourt
Ensures the correct welding parameter is used during welding operation Interpretation of working drawings (Approved working drawings and weld maps). Carryout necessary materials checks and maintain documentation Carryout of weld Audit. Checking of fit-up preparation and pre-weld inspections in accordance to applicable drawings and specifications. Reviewing and documenting welder’s qualification test result. Monitoring of dimensional surveys and review of reports for proper presentation and communication of results and documentation. Check visual inspection and NDT Activity Monitoring field fabrication Visual inspection of bevel angle and fit up for welding. Following up on joints available for required NDT as per procedure issued by the client. Conducting of procedure qualification test and developing of the WPS for in – service welding. Checking the paint storage conditions, paint batch no, MSDS etc. Material Inspection on base materials and welding consumable to conform to the contractor specification and standard. Verified daily welding report of sub-contractor writing of daily welding report and daily progress report of all the site activity. Supervising of the fabrication work during the execution of the construction. Taking the record of all the fittings and other materials used for daily fabrication. Review, monitor and report daily the status of inspection and test activities executed by the Contractor, Subcontractors and Vendors at the Worksite. Monitor Contractor and Subcontractor’s verification of welding and coating Products certification with incoming products by batch numbers, ensuring that expiring dates and required storage conditions are respected. Fit up inspection, welding inspection before, during and after welding Assist in Providing timely corrective actions to identified non-conformances on welding. Liaises with clients site personnel on welding related issues identified on site Ensure that approved WPS are used for joints and materials the qualify for Ensure that inspection activities are done as per project ITP Lead visual inspection of fabricated items with client and other inspectors Raise NDT request, Witness NDT Inspections (PT, UT, MPI), Review NDT Ensure that weld repairs are done according to schedule and specifications Monitor weld repairs and ensures that all operations are done in line with the procedures Report HSE anomalies and ensures that permit to work (PTW) is available prior to job commencement Ensure that the required specialized technical competence in welding, NDE, painting, various tests, etc, at all levels and adequate facilities are maintained by the Contractor and Subcontractor for the Works at the Worksite.
Inspection and Testing Department (One Year Industrial Training)
Alcon Nig Ltd
April 2006 - March 2007 (1 year )
Port harcourt
Conducting of Penetrant Test on structural weld, Dimension Control, Welding and Fabrication
Four Months Industrial Training
Alcon Nig Ltd
February 2004 - June 2004 (4 months)
Port harcourt

(Production Department) Four Months Industrial Training


Different operations on Lathe, Milling and Drilling Machines

PERIOD: (2004)

Additional information

Pastor Luke Okeagu Global Reconciliation Ministries, Ogbunabali, P/H 0803232603 Mr Engbi,De-graft A. Total HSE ADVISOR, Port Harcourt. 07012291304 Mrs. Ifeoma Ewah Global Reconciliation Ministries, Ogbunabali, P/H 07060863130
Certificates, Courses, Trainings
About Me
Nkama Ogbonnaya Sunday Certified Welding Inspector (AWS/CWI) With 6years experience in the oil and gas industry and engineering construction seeking career opportunities in production operation management, construction engineering, and reliability engineering and maintenance. My business experience and my education are base on a unique combination of skill, team leadership, and hard working, which has enabled me to manage complex projects. My use of visible leadership engagement with employees and Contractors has enabled me to build a culture of zero tolerance for injuries and incidents and establish compliance with safe operating procedures/policies SKILL Good Interpersonal Skills Welding, Metal Fabrication, Construction Material, Engineering, NDT, Piping, Pipeline, Inspection and ASME. MEMBER NIGERIAN ASSOCIATION OF TECHNOLOGISTS IN ENGINEERING (MNATE) Thanks.