Back to CV list
Abdulrahman Tunde
Personal data and contacts will be open only to employers with access to CV database
Qaqc inspector 600 000
Job Type: Full-Time

Education

From 0 to 2007
Obafemi Awolowo university
No added languages

Experience

QAQC INSPECTOR
Nigerdock Nig. Plc
May 2007 - Present Day (9 years 10 months)

Confirm the on materials received by the material controllers are the appropriate ones on the drawings

Conducting the WPQ (weld procedure qualification) for the whole project

Conduct welder qualification test for the project

Monitor rolling of plates to get the specified diameter of pipe

Conduct Visual Inspection on completed welded joints and arrange for the necessary NDT

Liaising with clients and third party authority on QC issues

Establishing that procedure is available and has been approved.

Monitor welding parameters (weld audit) to verify compliance with specified procedure.

Preparation of test packs on structural components

Conduct specific inspections on materials against documentation and marking on correctness of parent materials.

Conduct welder qualification test.

Conduct Visual Inspection on completed welded joints.

Assist in the correct review of radiographs in accordance with the applicable code and client’s specification

Monitor/witness the marking of repair location and repair process.

Monitor post weld heat treatment (PWHT) and hardness test with associated documentation.

Monitoring of hydrostatic test and the documentation of the associated test packs.

Generate the final relevant quality records/reports (Inspection Release Certificate prior to blasting/Painting)

Assists in the review of radiographs in accordance with the applicable codes.

Checking/witnessing the correct application of all NDT operations

Monitor the usage of welding process and process parameters in accordance with the WPS

Verifying of fit-up and member preparation are in accordance to WPS

Ensuring Piece mark number transfer on every material being cut

Analyse the Mechanical result on a welding procedure test (Tensile,Microetch,hardness,Impact)

Prepare PQR package (NDT,mechanical test report, monitoring sheet, consumable certificates etc)

Witness and evaluate Bend testing, Nick break and also perform Macro etch

Verifying of fit-up and member preparation are in accordance to WPS

Ensuring Piece mark number transfer on every material being cut