Back to CV list
ERIC
Personal data and contacts will be open only to employers with access to CV database
Quality control specialist
Job Type: Full-Time

Education

From 0 to 1999
University of Portharcourt, Rivers State.
No added languages

Experience

E & I Quality Control Inspector/Supervisor
Moody International Ltd/Mobil Producing Nigeria - Deep Offshore Operation
July 2012 - Present Day (4 years 10 months)

PROJECT: SATELLITE FIELD DEVELOPMENT PROJECT (PHASE 1), USARI FP PLATFORMS.

CLIENT: EXXONMOBIL DEVELOPMENT COMPANY NIGERIA (MAJOR INTEGRITY PROJECTS)

POSITION: QA/QC SUPERVISOR (July 2012 till Date)

CONTRACTOR: SUBSEA 7 / GLOBESTAR COMPANY LIMITED

Responsibilities includes but not limited to the following:

 Witness all tests required in ITP & perform final inspection/mechanical completion check

 Conducts Factory Acceptance Test of Project Materials

 Perform quality inspection activities in accordance with project quality plan/inspection & test plan.

 Review of Project drawings (loop drawings, single line & interconnection drawings etc) and other project related documents.

 Ensure constructional materials are duly inspected and verification carried out in line with project quality plan

 Attend daily project progress meetings and ensure procedures are followed as required by contract.

 Materials are properly stored & preserved in line with Exxon-Mobil Global Practice & project requirement.

 Participate in evaluating contractor’s records & perform construction assessment always by using the surveillance program guide

 Ensure suppliers' & contractors’ quality assurance quality control activities meets project requirement

 Surveillance, supervision & monitoring of construction activities.

E & I Quality Control Inspector/Supervisor
Moody International Ltd/Mobil Producing Nigeria - Deep Offshore Operation
November 2009 - April 2012 (2 years 6 months)

PROJECT: EAST AREA PROJECT - EAP EPCM2 GN 4TH LP COMPRESSOR INSTALLATION PROJECT

CLIENT: EXXONMOBIL DEVELOPMENT COMPANY NIGERIA (MAJOR INTEGRITY PROJECTS)

POSITION: CLIENT ELECTRICAL/INSTRUMENT QUALITY CONTROL INSPECTOR/SUPERVISOR Nov. 2009 till April 2012

CONTRACTOR: SUBSEA7 / GLOBESTAR COMPANY LIMITED

Responsibilities includes but not limited to the following:

 Review & verification of project work pack, job cards, contractors/sub-contractors’ drawings & data dossiers etc.

 Review of written work procedures & plans to ensure compliance with contract requirements.

 Assess contractor’s Engineering processes & ensure they are in place for sound Engineering work.

 Ensure constructional materials are duly inspected (verification/dimensional check)m materials are properly stored & preserved in line with Exxon-Mobil Global Practice & project requirement.

 Maintain efficient Quality Management System (QMS) & ensure safe work practices are highly maintained.

 Carry out construction work audits & assessment to ensure deficiencies/quality concerns are identified, assigned for action and resolved accordingly

 Maintains daily activities/weekly progress report and attend construction daily progress meetings.

 Verification of completed work & closing of check sheets, punch list and job cards.

 Mechanical completion, pre-commissioning & commissioning of E & I activities & ensure all relevant documents are completed.

 Monitored Start up & functional test of 4th LP Compressor / Gas Turbine in preparation for final hand-over to MPN Operation team

Project Work includes the following

  • Cable verification (cable type, cable number, tag number etc) cable pulling form originating point to termination point, check completion & correct installation of cables, cable gland installation, continuity & insulation resistance (megger) test, cable termination etc. Cable includes electrical power cables, lighting cables, instrument signal cables, fire & gas cables, fiber optic cables.
  • Installation of equipment name plates & identification tags, calibration & installation of electrical & instrument devices, junction boxes, emergency push buttons, valves, temperature elements, gauges, lighting supports/fixtures, cable ladder racks and perforated trays, level gauges, loop check , instrument tubing installation, leak test, installation of fire & gas system.
  • Cable pulling & power distribution to local control stations, process area lighting circuits, small power / welding receptacles etc

Others include:

Installation & hook-up of Siemens & Rolls-Royce LP Compressor & Gas turbine vendor package which includes monitoring & test required to the point of mechanical completion, pre-commissioning & commissioning of the package.

Control systems verification on Integrated Control & Safety System (ICSS) and configuration of the Emergency Safety Shutdown System associated with the Compressor / Gas turbine package.

Telecom/Instrumentation Quality Control Inspector
Temec Nigeria Limited/Jimcol Resources Limited/Shell Petroleum Dev. Nigeria Ltd.
June 2006 - August 2009 (3 years 3 months)

PROJECT: BONNY TERMINAL INTEGRATED PROJECT [BTIP] BONNY OIL AND GAS TERMINAL [BGOT] BONNY ISLAND. (Facilities Upgrade & Installation of New Electrical/Instrumentation/Telecommunication Equipment at– Onshore & Deep Offshore locations, Bonny Island.

CLIENT: SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED.

CONTRACTOR: HUNDAI HEAVY INDUSTRIES [HHI] LIMITED.

POSITION HELD: SPDC QUALITY CONTROL INSPECTOR. [June 2006 to August 2009]

Project work includes:

  • Site survey, installation of telecom antennae, solar power systems, two-way radio air navigation & communication system.
  • General structured cabling work, installation & Splicing of Fiber Optic Cables for Data LAN/WAN Networking, CCTV & CATV - [DSTV] System,
  • Installation of PABX, pulling & termination of telephone cables into MDF, IDF & interconnection cabinets, Voice/Data outlets,
  • Installation of encased concrete ducting, manhole construction & cable route markers,
  • Installation of Fire & Gas detectors/Linear Heat Detectors (LHD) at Crude Oil Tanks at Bonny Terminal Crude Tank farm.
  • Calibration & installation of instrument devices - flow meters, control valves, pressure transmitters, temperature transmitter, etc
  • Installation, test, termination & commissioning of Electrical & Instrument cables.

Responsibilities includes but not limited to the following:

 Supervision and monitoring of all construction/installation work at various sites.

 Monitors daily work progress to verify compliance with Projects requirement and implementation in line with Design and Engineering Practice, SPDC Construction Specification, Approved for Construction drawings etc.

 Perform Assurance checks at Work Sites.

 Inspection and follow-up of installed field equipment based on Inspection Test & Plan

 Participate in client / contractors’ project meetings regarding construction, implementation & management of QA/QC activities.

 Ensure work is carried out accordingly as in AFC drawings and other project controlling specification & design.

 Monitors and highlight QA/QC and HSE lapses by issuing CAR, NCR & Hazards Identification Reports [HIR]

 Ensure work carried out in Hazardous areas meets the hazards classification area code.

 Ensure Safe work practices are maintained on Site. by implementing P.T.W

 Ensure all activities are covered by valid PTW’s & other complimentary permits.

INTERNATIONAL EXPERIENCE:

INSTALLATION & COMMISIONNING OF TELEMETRY SYSTEM AT SPM2 (DEEP OFF-SHORE) EQUATORIAL GUINEA, WEST AFRICA

CLIENT: SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED.

CONTRACTOR: HUNDAI HEAVY INDUSTRIES [HHI] LIMITED.

POSITION: SPDC Quality Control Inspector / Company Representative

PROJECT: Installation & Commissioning of Telemetry (SCADA) system for SPM3, Crude Loading Platform & Onshore - Central Control Room at Bonny Terminal,

Work includes to the following

Electrical & Instrument equipment installation, cable installation, continuity/insulation resistance test - point to point cable test, verification of work completion for start up, installation of facility electric backup system, instrument functionality test, trouble shooting activities and remedial action on failed system/subsystem etc

Project / Site Engineer
Ranc Limited
February 2002 - June 2006 (4 years 5 months)

PROJECT: PROCUREMENT, INSTALLATION & COMMISSIONING OF TELECOMMUNICATION TOWERS (EAST/WEST OPERATIONS)

CLIENT: SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED.

CONTRACTOR: RANC LIMITED, OGUNU WARRI, DELTA STATE.

POSITION HELD: Project/Site Engineer [Feb. 2002 till June 2006]

Responsibilities:

Supervised and commissioned the following Telecommunication Tower Projects for SPDC.

 Foundation construction and erection of 84m four legged self-support Tower at SPDC Edgeba, Warri, Delta State.

 Foundation construction and erection of a 45m three legged Tower at Osubi Air Stip, Delta State

 Foundation construction and erection of 60m four legged Tower at Intel’s Yard, Portharcourt. Rivers State.

 Foundation construction & erection of 120m four legged Towers at Afam/Okoloma, Imo Rivers, 1 & 2

Work Includes but not limited to the following:

Site Survey, Project Scheduling, Mobilization of Work Materials [Equipments and Personnel] to Site, Soil Investigation,

Foundation Construction, Site management, QA/QC, Handling and Delivery of Construction materials to site, loading of tower members, installation of Aviation lights and lightning protection. Integrity Check etc

6. PROJECT: CORPORATE MICROWAVE BACKBONE RADIO TRANSMISSION & MAINTENANCE

CLIENT: SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED.

CONTRACTOR: RANC LIMITED, OGUNU WARRI, DELTA STATE.

JOB TITLE: Radio Transmission Engineer: [Nov. 2004 till Aug 2005]

Responsibilities:

Monitored of radio signals at base station, installation & maintenance of battery banks, rectifiers/back-up power systems, Voice & data integration, digital MW radio, point to point & point to multipoint radio link systems, trouble shooting & general maintainability of radio equipment. Cable management system in radio room, telephone interconnection cabinets, maintenance of voice / data outlets etc

PROJECT: TELECOMMUNICATION FACILITIES INTEGRITY CHECK & EQUIPMENT INVENTORY / DOCUMENTATION IN ALL SPDC LOCATIONS (EAST LOCATIONS)

CLIENT: SHELL PETROLEUM DEV. COMPANY OF NIGERIA LIMITED

CONTRACTOR: RANC LIMITED, OGUNU WARRI, DELTA STATE.

JOB TITLE: Field Engineer [Aug 2005 till Dec 2005]

Responsibilities:

  • Testing & measurement of radio signal strength/quality.
  • Visual Inspection of all Telecommunication Equipment at each location.
  • Preparation of project field report on Telecommunication facilities in all locations [land, swamp & offshore locations]
  • Earth resistance integrity check etc